Front and rear seat adjustment system
I finished the seats by reproducing the slide systems that allow the seat to be adjusted forward and backward according to the size of the pilot. I used 2 mm…
The front seats
I continued to reproduce the seats to scale to dress my cabin.Reproducing the front seats, seems more complex than the back seat. Fortunately in the documentary resources provided by the…
Preparation of the setup, receiver, servo controls and motorization, suitable for the ultra light Potez 58 aircraft
All of the elements that make up the control and motorization system are miniaturized elements purchased on internet. In the photos below, you can see the motor, which is a…
Tutorial for the construction of an ultra light potez 58 (part 3). End of assembly
You will find below the video describing the last stages of construction step by step of a Potez 58 of 46 cm wingspan with the ambition not to exceed 20-25…
Tutorial for the construction of an ultra light potez 58 (part 2). Cutting and construction 1
You will find below the video describing the first stages of construction step by step of a Potez 58 of 46 cm wingspan with the ambition not to exceed 20-25…
Tutorial Ultra light Potez 58 for indoor and home fly (part 1).
In a previous post, I told you about my wish to make an ultra light P58 to overcome this confinement. Thanks to Christian Veyssière and Gérad Puret for their advice.…
Realization of a part in fiberglass and resin.
I inaugurate below a new section to describe my way of proceeding and my techniques. To start, how to make a resin and fiber piece by taking for example my…