Skip to content

EOL37 Rc Model Planes, techniques and methods to share

Logo EOL 37
Facebook Youtube
  • Home
  • Potez 58
  • Arsenal VG33
  • Indoor
  • Foams
  • Tutorials
  • Videos
  • Contact me
  • Français
  • Home
  • Potez 58
  • Arsenal VG33
  • Indoor
  • Foams
  • Tutorials
  • Videos
  • Contact me
  • Français
Read more about the article The central wing struts of the aircraft and the stabilizer

The central wing struts of the aircraft and the stabilizer

  • Post author:eol37
  • Post published:March 28 2022
  • Post category:Balsa scratch built scale model/Potez 58

The Potez 58 had several struts to maintain the geometry of the aircraft. The 4 main ones went from the bottom of the fuselage to the outer parts of the…

Continue ReadingThe central wing struts of the aircraft and the stabilizer
Read more about the article Potez 58′ slats

Potez 58′ slats

  • Post author:eol37
  • Post published:March 3 2022
  • Post category:Balsa scratch built scale model/Potez 58/Tutorials

The Potez 58 was equipped with fixed slats on the leading edge of the wing. These are small fixed airfoils designed to prevent airflow at high angles of attack and…

Continue ReadingPotez 58′ slats
Read more about the article Potez 58 and the back and forth cable controls

Potez 58 and the back and forth cable controls

  • Post author:eol37
  • Post published:January 13 2022
  • Post category:Balsa scratch built scale model/Photos and Videos/Potez 58

My house work is finished and I have resumed the construction of my Potez 58 at 1/6.6 scale. On this video, a progress report of the construction and in particular…

Continue ReadingPotez 58 and the back and forth cable controls
Read more about the article To make the base of the fin

To make the base of the fin

  • Post author:eol37
  • Post published:April 6 2021
  • Post category:Balsa scratch built scale model/Potez 58

The profile of the stabilizer of my Potez 58 is bi-convex, while the bottom of the fin is flat. The fin will be glued on the stabilizer and it is…

Continue ReadingTo make the base of the fin
Read more about the article The struts of the aircraft

The struts of the aircraft

  • Post author:eol37
  • Post published:March 16 2021
  • Post category:Balsa scratch built scale model/Potez 58

I was able to finish the shrouds which are profiled and effective on this model, as I did not put any reinforcements between the spars. So the adjustment to keep…

Continue ReadingThe struts of the aircraft
Read more about the article Realization of a scale model landing gear: The Potez 58, episode 2/2

Realization of a scale model landing gear: The Potez 58, episode 2/2

  • Post author:eol37
  • Post published:December 7 2020
  • Post category:Balsa scratch built scale model/Potez 58/Tutorials

The second part of the video describing the construction of a scale landing gear on an 1/6.6 Potez 58 aircraft. In this second episode, you will see the inner legs,…

Continue ReadingRealization of a scale model landing gear: The Potez 58, episode 2/2
Read more about the article The Potez 58 landing gear: Final assembly

The Potez 58 landing gear: Final assembly

  • Post author:eol37
  • Post published:November 22 2020
  • Post category:Balsa scratch built scale model/Potez 58/Tutorials

In this last step, I will show you the method used to assemble my landing gear. To get started, here is a picture with the equipment I will need. As…

Continue ReadingThe Potez 58 landing gear: Final assembly
Read more about the article Realization of a scale model landing gear: The Potez 58, episode 1/2

Realization of a scale model landing gear: The Potez 58, episode 1/2

  • Post author:eol37
  • Post published:November 18 2020
  • Post category:Balsa scratch built scale model/Photos and Videos/Potez 58/Tutorials

Video describing the construction of a model landing gear on a Potez 58 airplane at scale 1/6.6. In this first episode, you will see the realization of the damped leg,…

Continue ReadingRealization of a scale model landing gear: The Potez 58, episode 1/2
Read more about the article Potez 58’s landing gear : Part 4: Leg scale details.

Potez 58’s landing gear : Part 4: Leg scale details.

  • Post author:eol37
  • Post published:November 13 2020
  • Post category:Balsa scratch built scale model/Potez 58/Tutorials

What I described earlier in the articles was the general structure of the landing gear and the damped leg. The next step is to "dress" the inner legs and add…

Continue ReadingPotez 58’s landing gear : Part 4: Leg scale details.
Read more about the article The Potez 58’s landing gear: 2nd and 3rd part, the connecting piece and the inner legs

The Potez 58’s landing gear: 2nd and 3rd part, the connecting piece and the inner legs

  • Post author:eol37
  • Post published:November 11 2020
  • Post category:Balsa scratch built scale model/Potez 58/Tutorials

Part 2: The connecting piece between the fuselage and the moving leg Once the damped leg was prepared, I started work on the connecting piece between the fuselage and the…

Continue ReadingThe Potez 58’s landing gear: 2nd and 3rd part, the connecting piece and the inner legs
  • 1
  • 2
  • 3
  • 4
  • …
  • 7
  • Go to the next page

recent articles

  • The central wing struts of the aircraft and the stabilizer March 28 2022
  • Potez 58′ slats March 3 2022
  • Potez 58 and the back and forth cable controls January 13 2022
  • The Arsenal VG 33 computer-aided design model in Sketchup September 18 2021
  • To make the base of the fin April 6 2021

Topics

  • Balsa scratch built scale model (72)
    • Arsenal VG33 (5)
    • Potez 58 (67)
  • Events-News (4)
  • Foams (1)
    • Hand-launched gliders (1)
  • Indoor planes (16)
    • Epp indoor SV4 (9)
    • Mini Potez 58 (7)
  • Non classé (2)
  • Photos and Videos (11)
  • Tutorials (17)

Abonnez-vous à notre newsletter

Subscribe now

Vérifiez votre boite de réception ou votre répertoire d’indésirables pour confirmer votre abonnement.

  • Mentions légales
  • Politique de confidentialité
© Copyright 2023 - Eol37 Aeromodeler