Realization of a scale model landing gear: The Potez 58, episode 2/2
The second part of the video describing the construction of a scale landing gear on an 1/6.6 Potez 58 aircraft. In this second episode, you will see the inner legs,…
The second part of the video describing the construction of a scale landing gear on an 1/6.6 Potez 58 aircraft. In this second episode, you will see the inner legs,…
In this last step, I will show you the method used to assemble my landing gear. To get started, here is a picture with the equipment I will need. As…
Video describing the construction of a model landing gear on a Potez 58 airplane at scale 1/6.6. In this first episode, you will see the realization of the damped leg,…
What I described earlier in the articles was the general structure of the landing gear and the damped leg. The next step is to "dress" the inner legs and add…
Part 2: The connecting piece between the fuselage and the moving leg Once the damped leg was prepared, I started work on the connecting piece between the fuselage and the…
Today I am starting a series of articles describing the construction of the Potez 58 landing gear. You can see on the picture of the full-size plane below, that it…
Ce tuto pour expliquer l'installation, en passant par le contre couple avant, d'un réservoir sur une maquette RC (le Potez 58), et en rendant l'installation démontable pour les maintenances futures.…
The last article I published was about the installation of the glazing and the finishing of the Potez 58 doors. Once closed, there are still some defects to correct. As…
In this video, I show you how I made the windows and the doors on my Potez 58 RC of 1m71, scale 1/6.6. The Potez 58 was a touring and…
Thank you for your many answers about my forgotten tank on my Potez 58. Your answers were very helpful to me and allow me to select the best technical solution.So…