The Potez 58’s landing gear: 1st part, the shock absorbing landing gear leg
Today I am starting a series of articles describing the construction of the Potez 58 landing gear. You can see on the picture of the full-size plane below, that it…
Today I am starting a series of articles describing the construction of the Potez 58 landing gear. You can see on the picture of the full-size plane below, that it…
Ce tuto pour expliquer l'installation, en passant par le contre couple avant, d'un réservoir sur une maquette RC (le Potez 58), et en rendant l'installation démontable pour les maintenances futures.…
The last article I published was about the installation of the glazing and the finishing of the Potez 58 doors. Once closed, there are still some defects to correct. As…
In this video, I show you how I made the windows and the doors on my Potez 58 RC of 1m71, scale 1/6.6. The Potez 58 was a touring and…
Thank you for your many answers about my forgotten tank on my Potez 58. Your answers were very helpful to me and allow me to select the best technical solution.So…
What an idiot I am … I forgot to slide the tank before closing the cockpit … I only realized it last night and it really kept me awake. But…
I continued my work on finishing the fuselage.To begin with, I lightly sanded the coated fiberglass with 320 paper. I then used a professional car sealant to correct the last…
I've started reproducing the pedals. I couldn't find a representation of the systems on Potez 58. There's no documentation available. But the Potez 58 is a direct derivative of the…
J I continue my model learning by reproducing as much detail as possible of the cockpit equipment. On the program today, the lever located on the left side of the…
After having finished (for the moment) with the seats, I go on with the details of the cockpit and in particular a series of push buttons present on a lower…