Joint filler on fuselage
So I appied a putty on the fuselage to hide the joints between the collages of several pieces. It dried and I sanded tonight after work. OUTSIDE the sanding to…
Fuselage formwork
Following the adventures of my Potez 58. I hope you still follow me Today, it is the closure of the fuselage that is in the spotlight.If you follow me, you…
Installation of control systems in the fuselage
The fuselage structure is now waiting for me to install the controls before closing it. Scale models required taht control of the flap looks like at the real one. That…
Potez 58, tailplane construction
The construction advances and continues with the realization of the tailplane. Rudder and elevator have biconvex profiles with a central core in 0.4 mm plywood. The construction is therefore done…
POTEZ 58, Part 3
At the end of 2016, I took over the construction of the Potez and in particular the tail plane, then installed the wing keys. February 2017 is the assembly of…
Potez 58 Part 2
Basic documents: a triptych, the MRA and MVM reviews, which describe the Pierre Eclancher's semi-model. Then the basic plan. This is how I started the assembly
My Potez 58, genesis of the project
The story started in 98 with the purchase of MVM where I discovered the Pierre Eclancher model scale model (see photo). Some time later, it is MRA which offers this…
- Go to the previous page
- 1
- …
- 4
- 5
- 6
- 7