POTEZ 58, Part 3
At the end of 2016, I took over the construction of the Potez and in particular the tail plane, then installed the wing keys. February 2017 is the assembly of…
At the end of 2016, I took over the construction of the Potez and in particular the tail plane, then installed the wing keys. February 2017 is the assembly of…
Basic documents: a triptych, the MRA and MVM reviews, which describe the Pierre Eclancher's semi-model. Then the basic plan. This is how I started the assembly
The story started in 98 with the purchase of MVM where I discovered the Pierre Eclancher model scale model (see photo). Some time later, it is MRA which offers this…
The 3 planes of the day in the car and ready to fly Finally the first flights on video https://youtu.be/7w7jNSNIxqs
I made the landing gear with a carbon rod glued to the structure. A bent iron rod was glued to the carbon rod and held with a piece of heat-shrinkable…
The assembly of the SV4 stampe in 85 cm epp is advancing and almost nearing its end. To start, I cut the location of the aileron servos which were then…
The assembly of the stampe continues with the installation of hinges on the control surfaces of ailerons. I use mini hinges which I find top for planes of this scale.…
I used 1mm carbon rods to strengthen the fuselage and make it more rigid. Bonding of the fixed part of the elevator and installation of carbon rods to maintain the…
The stampe consists of 2 wings cut in one piece each, the ruder and the rudder flap, as well as the elevator and its flaps. The fuselage consists of 3…
Yes the decoration is very important. The desire to build airplanes is the realization of a dream that we have by admiring the real one. No exception to this rule…