I also continued my work on the seats with the upper surface of the stabilizer and the junction with the fin.As you can see in the photo below, there is…

The wing has a Clark Y profile and is therefore flat on the lower surface, so no worries for the seat.On the other hand the profile of the stab is…

For the finishing of the wheel fairings, I used a detailed enlargement of an old photo of the size which allowed me to see that I have to redraw the…

While waiting for the rest, I redid 2 wheel fairings. Indeed, I had damaged one. The technique has not changed, the plywood templates are glued to the roofmat, which are…

Everything is said in the title… I finished my rivets, I coated with a primer and sanded lightly with water.Then 2 layers of polyurethane paint…. What do you think ?…

To reproduce the rivets, I have the chance to work in a lab and I recovered an automatic and adjustable pipette which went to the trash.With that, I should be…

And yes, the hood is not finished. I managed to recover a tiff photo of the Potez 58 (Thanks Alban) and suddenly, I was able to gain enough magnification to…

I applied a final coat of spray sealant. I let it dry and lightly sand it with water. The surface is smooth and perfect… All in all, the hood took…

I have made good progress in finishing my hood and fairings. After using an epoxy resin loaded with microballoon, I took a waxed gel coat that I spread. I think…

The hood and fairings still require a lot of work to correct faults. Bumps, hollows, overlapping bands …I have little experience in this area and lots of contradictory information.What to…